12
After completion of the maintenance work and fault rectification, install all the safety devices and
check whether they are fully functional.
2.4.9 Structural alterations to the Universal Belt Grinding Unit
Modifications, retrofitting or rebuilds of the Universal Belt Grinding Unit are not allowed without
the permission of the manufacturer. This also applies to the installation and adjustment of safety
devices.
No alterations may be carried out without prior written permission from KNECHT Maschinenbau
GmbH.
Immediately replace machine parts which are not in perfect condition.
Use only original replacement and wear parts. If parts are purchased from external suppliers, it
cannot be guaranteed that they will be constructed and manufactured to withstand the stresses
and provide the required level of safety.
2.4.10 Cleaning the Universal Belt Grinding Unit
Cleaning agents and materials used must be handled properly and disposed of in an environmen-
tally friendly way.
Ensure that wear and replacement parts are disposed of in a safe and environmentally friendly
way.
2.4.11 Oils and greases
When handling oils and greases, follow the safety instructions for the product. Observe special
instructions for the foodstuffs sector.
2.4.12 Relocation of the Universal Belt Grinding Unit
Even when moving the grinding machine with the HV 262 Universal Belt Grinding Unit a short
distance from its site, disconnect it from all external power supply sources. Before restarting the
machine, connect it properly to the current supply.
When loading or unloading, only use hoisting and load lifting equipment with sufficient load-
bearing capacity. Appoint a qualified banksman (signaller) for the lifting process.
No persons other than those entrusted with this work may be present in the loading and installa-
tion area.
Only lift the grinding machine correctly with a suspension device in accordance with the operat-
ing instructions (attachment points for load suspension devices, etc.). Only use suitable transport
vehicles with sufficient load-bearing capacity. Attach the load securely. Use suitable attachment
points. When putting in operation again, proceed only as instructed in the operating instructions.
2. Safety
