26
7.3 Grinding sickle-shaped cutter knives on the wet grinding belt
Swivel the fork (7-11/1) forward before starting
the grinding operation for sickle-shaped cutter
knives. The carriage stops in this position.
Place the function disk (7-12/2) on the locating
bolt (7-12/1).
For sickle-shaped cutter knives, however, rotation
is merely restricted by the contour. The func-
tion disk can be moved to the left and right. The
untoothed region is then facing away from the
operator.
Position the contour (7-12/3) on the side of the
groove (7-12/4).
The toothing on the function disk (7-12/2) ensures
that the grinding plate remains fixed in position
during knife change.
The function disk (7-13/1) should be inserted so
that the entire knife blade can be ground.
This is done before the grinding lever (7-13/2) is
locked tight.
The grinding operation has already been described
in Chapter 7.2.5
.
7. Operation
Figure 7-11
Swivelling the fork forward
Figure 7-12
Inserting the function disk
Figure 7-13
Inserting the function disk
1
2
1
1
4
2
3
