19
All work on the machine may only be performed by trained personnel.
The locally applicable safety and accident prevention regulations must be
observed.
There is a risk of hands, hair and clothes getting caught in the grinding
machine while the machine is on.
This can result in serious injuries. Personal protective equipment must be
worn.
CAUTION
To save space, it is possible to swivel the HV 262
Universal Belt Grinding Unit (6-1/3) to the side.
To bring it to working position, push it onto the
pins (6-1/1) and clamp it tight with the clamping
lever (6-1/2).
The clamping lever (6-1/2) and the pins (6-1/1) can
be requested from KNECHT Maschinenbau GmbH.
Turn the “Units ON / OFF” switch on the grinding
machine to “ON” position. Wet-grinding belt, flap
brush and grinding disk start rotating.
6. Commissioning
Figure 6-2
“Units ON / OFF”
Figure 6-1
Swivelling the Universal Belt Grind-
ing Unit to working position
1
2
3
