22
7.2.2 Setting the grinding angle
For setting the desired grinding angle, insert the
matching spacer disc (7-3/1) on the locating pin
(7-3/2).
Spacer disks for 25° and 27° are located on the
base plate (3-2/4).
7.2.3 Mounting the grinding plate
The grinding plate (7-4/1) is placed on top of the
spacer disc (7-4/2).
The cylinder pin (7-4/3) of the spacer disk (7-4/1)
must engage in the borehole (7-4/4) of the grind-
ing plate.
Using the locking lever (7-5/1), the grinding plate
(7-5/2) is fixed to the carriage.
For that, turn the locking lever (7-5/1) on the
locating pin (7-5/3) in clockwise direction.
7. Operation
Figure 7-3
Spacer disks for adjusting the grind-
ing angle
Figure 7-4
Mounting the grinding plate
Figure 7-5
Fix grinding plate with locking lever
1
2
2
1
4
3
1
3
2
