24
7. Operation
Make the locking disk (7-8/1) inactive by turning
the star knob (7-8/2) in counter-clockwise direc-
tion by approx. 1/4th of a rotation.
Turn the hand wheel (7-8/3) in clockwise direction
until the cutter blade (7-8/4) touches the grinding
belt (7-8/5).
Tighten the star knob (7-8/2) back again.
Turn the hand wheel (7-9/1) to the second locking
position of the locking disc (7-9/2).
NOTICE
Press with the thumb on the locking lever
(7-9/3) to move to the second locking posi-
tion. Turn the hand wheel (7-9/1) in clockwise
direction with the remaining four fingers.
Before switching on the grinding machine, swivel
back the grinding lever with grinding plate and
knife (7-6).
Figure 7-8
Making the locking position inactive
Figure 7-9
Turning the hand wheel to second
locking position.
1
3
2
4
5
1
2
3
