26
7.2 Switching on the grinding machine
Press the “Control On” button (3-5/1). Turn the selector switch (3-5/2) on the switch box to
“Grind”.
The grinding wheels start rotating.
7.3 Grinding of circular knives with d. 180 - 475 mm
Never change the grinding device with clamped circular knife.
Never dismantle the grinding device while the machine is on.
Take care while clamping the knife! Sharp knife edge!
Danger of serious cut injuries! Wear protective gloves.
CAUTION
Mount suitable grinding device for d.180 - 475 mm.
Release the clamping lever (7-1/1).
Tilt the grinding device (7-1/2) horizontally to the
right.
Remove the clamping nut.
Place the circular knife with knife guard (7-2/1) on
the grinding device (7-2/2).
Remove knife guard.
7. Operation
Figure 7-1
Swiveling the grinding device to
clamping position
1
Figure 7-2
Placing the knife on the grinding
device
2
1
2
3
