38
8. Care and maintenance
For all work on the honing machine, the locally applicable safety and
accident prevention regulations as well as instructions in the “Safety”
and “Important notes” section of the operating instructions must be
observed.
Use only original replacement and wear parts. If parts are purchased from
external suppliers, it cannot be guaranteed that they will be constructed
and manufactured to withstand the stresses and provide the required
level of safety.
CAUTION
8.1 Cleaning
Clean the machine each time after sharpening to prevent the swarf from drying, hence making it
harder to remove.
After cleaning, lightly grease the honing machine with non-corrosive oil. See also the explanations
in the lubrication schedule, Chapter 8.3.
The coolant must be changed and the container cleaned every week.
8.2 Lubrication
All bearing points are equipped with water-tight, lubricated anti-friction bearings and are there-
fore maintenance-free.
8.3 Lubrication schedule and lubricant table
Lubricating activity
Interval
OEST
SHELL
EXXON Mobil
Grease machine parts
after cleaning
After each grinding
operation
Paraffinum
Perliquidum
16L
Shell Risella
917
Marcol 82
