1
24
Press the “Control On” button (3-5/1).
Turn the selector switch (3-5/2) on the switch box
to “Grind”. The grinding wheels start rotating.
Check the direction of rotation.
The direction arrow (6-1/1) indicates the direction
of rotation of the right grinding wheel.
After ensuring that the wheels are rotating in the
prescribed direction, turn selector switch to “0”.
If the direction of rotation of the grinding wheel
is incorrect, have the phase reversed by a qualified
electrician.
Fill the water tray to 1 cm below the rim with
water.
The water tray is in working position, when the
bow-type handle of the water tray is in vertical
position and the grinding wheels are immersed in
water.
ATTENTION
The grinding wheels must not come in con-
tact with water in off position over long
periods of time, since they become untrue
otherwise.
6. Commissioning
All work on the machine may only be performed by trained personnel.
The locally applicable safety and accident prevention regulations must be
observed.
There is a risk of hands, hair and clothes getting caught in the honing
machine while the machine is on.
This can result in serious injuries. Personal protective equipment must be
worn.
CAUTION
Figure 6-1
Direction of rotation
