KMT STREAMLINE SL-V SRP 100, Руководство по эксплуатации и обслуживанию

Страница: 64 / 268

Section 4
Operation
20428705
7-2006/Rev 04
4-16
4.13 Alarm History
The Alarm History Screen displays the last 100 shutdown alarms indicating date, time and type of
alarm. Use the
▲ or ▼ arrow to view past alarms.
Figure 4-14: Alarm History Screen
Changing the Date and Time
The following procedure is used to change the date and time.
1. Remove power from the display by pressing the
E
-
STOP
button.
2. Pull the
E
-
STOP
button out and press the
RESET
button to energize the display panel.
3. Shortly, the number 24 will display. Ten seconds later, the number 32 will replace the
number 24 and a small blinking square will display on the bottom, right of the screen.
4. Press the blinking square to initialize the Configuration Screen used to set the parameters
for the panel display.
5. Select Date/Time and press
ENTER
. Set the year, month, day, hour, minutes and seconds.
Press
EXIT
to return to the previous screen.
6. Select Run Mode and press
ENTER
to return to the display panel.
4.14 Configuration Screen
The Configuration Screen is a password protected screen, used only at initial startup to set the
horsepower. If a new version of the display program is installed you must press the
RESET HP
button on the Setup Screen to update the displays.