KMS 06.001-1, Руководство пользователя

Страница: 25 / 63

KMS MA-5 manual
Version 5.1 25
3.4.1.8 Lambda-control
A standard (narrow band) BOSCH lambda sensor or
one of the KMS Lambda controllers (recommended)
can be connected to the system. Select the relevant
lambda sensor in the menu (top left).
When the engine is running, the A/F ratio/lambda ratio
will show in the communication bar.
Adjustment of air fuel ratio feedback control
Lambda controller type:
Via this menu you can specify the lambda
sensor/controller in use. For wideband sensors, the
input signal is via the included controller, while standard narrow band BOSCH lambda sensors can be
connected directly to the ECU.
Warning:
When you have a KMS UEGO Display controller you can choose 3 different
types of output signal (type a,b and c). Always check if the output type is the
same as selected in this software.
Use Lambda sensor:
1 (with correction on injection group 1): the only option for using a MA5.
Remaining options only work for the MA6 or MD35.
Lambda scaling:
In this menu the values of the different types of sensors/controllers are visible (not adjustable). The
KMS UEGO (display) controllers are pre-calibrated.
A/F to Lambda (or vice versa):
All the ECU
’s are standard set to A/F ratio. You can
change all the settings of your ECU to Lambda values.
All values will be converted. It is always possible to
switch back to A/F ratio.
When you switch between A/F and Lambda, these settings have to be saved in the ECU. The KMS
software will do this automatical
ly. When ‘yes’ is selected in the pop-up screen, the software will start
downloading to the ECU. It will automatically lock the setting after downloading.