KMS 06.001-1, Руководство пользователя

Страница: 35 / 63

KMS MA-5 manual
Version 5.1 35
Boost options
Clicking the ‘Boost options’ tab gives you a pop-up
screen where the overboost and boost-reduction
settings can be setup.
Overboost settings
This system allows overboost for a limited time span.
This rise above the normal boost pressure can be
activated by various variables (refer to
‘activation
input
’).
Activation input:
In the pulldown menu you can select which variable will
trigger overboost. Behind the variable the value can be set from which the overboost is allowed.
Overboost value:
When overboost is triggered, the boost pressure will rise above the target value by the percentage
entered here.
Only when PID control is activated.
Overboost PWM map:
If overboost is active, the system will use the overboost
PWM map.
The values in the boost PWM map can be easily
copied to the overboost PWM map by selecting the
cells and choose ‘copy boost to overboost map’. So the
values in the overboost PWM map can easily be
increased by a percentage over the boost PWM map
values.
Enable window for activation
Here you can set the margins within overboost is permitted. This to prevent engine damage.
Overboost activation time:
Specifies the time span during which overboost functions are active after being triggered.
Overboost pause time:
To prevent the overboost from being activated too rapidly (after a preceding overboost), you can set a
pause interval here before overboost can be triggered again.