KMS 06.001-1, Руководство пользователя

Страница: 52 / 63

KMS MA-5 manual
Version 5.1 52
4 Programming
Before programming is started, all connections and sensors must be checked. Look at the
communication bar to check the sensors for correct functioning and setting.
If everything is in good working order, the programming of the diagrams can be started.
There are four ways of changing the values shown in the diagrams:
- Manual changing boxes
- Bar charts adjustment
- Changing 3D graph
- Loading the correction maps (only injection)
4.1 Manual changing boxes
By checking a control box, the relevant parameter can be set
manually. If a control box has been selected, an edit menu will appear
that allows you to change the selected values in various ways.
By selecting two separate rows or columns the in between values can
be
“levelled” with the use of the horizontal or vertical interpolation
function.
After selecting multiple boxes the copy or paste function can be used
to copy data, also from other KMS mappings.
4.2 Bar charts adjustment
The columns or rows of the diagrams can also be shown in the form of bar charts. The bar charts will
appear when an engine speed or engine load value is clicked. If an engine speed is clicked, a bar
chart will appear showing all the values related to that engine speed.
If an engine load value is clicked, a bar chart will appear showing all the values related to that engine
load value. Access to the bar charts can also be obtained by pressing the ALT + C keys or the ALT +
R keys simultaneously. The thin yellow line in the graphs of the injection diagram indicates the
maximum duration of injection for the engine speed concerned. If the yellow line is exceeded, injection
time overflow occurs.
It is also possible to modify the diagram values in the bar charts by using the arrow keys, or the arrow
keys in combination with the Ctrl or Alt key. The left/right arrow keys can be used to move through a
column or row. When the upward or downward arrow key is used, the value will go up or down 0.10
with each touch of the key. If the Alt key is pressed simultaneously, the value will change 0.01 per
touch and if instead of the Alt key the Ctrl key is pressed, the value will change 1.00 per touch.
When the engine is running, the space bar can be touched to go automatically to the relevant value in
the bar chart (matching the current situation of the engine), even when this value is at another engine
speed or engine load.
To go to another engine speed or engine load, use the Page Up / Page Down keys.
The correction tables can also be shown in the form of a bar chart if a correction figure is clicked. And
here can also the arrow keys be used to change the values.