54
7.2.3
Video System surgiCam® HD Wireless and surgiCam® 4K Wireless
This system transmits the surgiCam® (1) camera video wirelessly to the receiver unit (3). For displaying the
camera video, a monitor must be connected to the receiver unit via HDMI.
The surgiCam® is designed and optimized for use in the OR or treatment room.
•
Do not use outside clinical environments.
1 Camera surgiCam® HD/4K Wireless in the handle
3 Receiver unit surgiCam® HD/4K Wireless, rear
2 marLED® X
Ideally, camera and receiver unit are mounted at the same height of at least 1.5 m above the floor, facing
each other, and have a direct and unobstructed line of sight.
The wireless connection can be established only if a monitor is connected!
Please note when using the video system
•
No more than 2 radio systems may be installed per room.
•
Camera-receiver pairs are paired ex factory (successful pairing). The pairing is maintained after
switching off and on again. Change of the assignment is possible by establishing a new pairing, see
“Pairing of camera and receiver unit”, page 56.
•
Image data transmission from one camera to several receiver units is not possible.
•
Camera and receiver unit must have a distance of at least 200 mm to the user, as otherwise the wireless
connection might be interrupted.
