55
Enhancing the wireless connection
The receiver unit surgiCam® HD/4K Wireless works properly up to a distance of 8 m. For optimum results,
maintain an unobstructed line of sight and keep a distance of ≤
2.5 m between camera and receiver unit.
Camera and receiver unit will still work reliably if there are objects between them. However, neither unit
should be completely surrounded by metal objects.
Metal objects may reduce the performance of the receiver unit surgiCam® HD/4K Wireless.
•
If possible, position any further operating lights away from or above the line of sight.
If essential objects between camera and receiver unit impair the wireless connection:
•
Position the object in the middle between the camera and the receiver unit.
•
Reduce the distance between camera and receiver unit.
7.2.4
Receiver Unit surgiCam® HD Wireless
Fig. 7-1:
Receiver unit surgiCam® HD Wireless, rear
1 HDMI OUT 2
Video signal output: HDMI (DVI with adapter)
2 HDMI OUT 1
Video signal output: HDMI (DVI with adapter)
3 STATUS, yellow
Flashing slowly:
Channel search
Flashing quickly: Establishing connection
Continuously on: Connection established; source image is shown on the monitor
4 POWER, green
Continuously on: Receiver unit turned on
5 USB
USB port for installing firmware updates for receiver unit, no general-purpose I/O port
6 CHANNEL
Channel selection
7
On/off switch (off = standby)
8 5 VDC
Power supply connection, 5 V DC, type XP-Power ACM18US05
