klover K top, Руководство пользователя

Страница: 45 / 64

45
Anti-freeze protection
In intensely cold periods it is good practice to leave the
heating system running. In the event of prolonged absence,
anti-freeze should be added to the heating water and the
water inside the heating cooker/heating stove, or the system
must be completely emptied.
In a system subject to being emptied frequently it is essential
that it is filled with water that has been appropriately treated to
eliminate hardness that can lead to limescale deposits.
Operating principle
The heating cooker is an economical wood-burning boiler in
the shape of a cooker with an oven coated with majolica.
You therefore have the pleasure of seeing the flame through
the ceramic glass like in a normal stove, you can also cook on
the cast iron hobs, and in addition the radiators in the home
are also heated and DHW is supplied for all of the family.
The heating cooker/heating stove can be combined with an
appliance that is already installed (gas boiler, diesel oil boiler
or wood-burning boiler etc...) or can function as the only
source of heating for the home.
Boiling
If for any reason (power cut, a pump fault, too much wood,
etc…), the water in the heating cooker/heating stove reaches
boiling point, carry out the following operations immediately:

Fully open all smoke dampers;

Open a DHW tap and leave the water to run until the
temperature in the heating cooker/heating stove
drops
(KP top/TSP top models only).

Close the ash drawer and its air inlets completely.
After having ascertained the reason for the high temperature,
wait for everything to go back to normal (temperature below
60°C),
then check the water level in the side reservoir and
top up if necessary.