klover K top, Руководство пользователя

Страница: 53 / 64

53
Any deposits on the walls of the combustion chamber (if
particularly resinous wood is burned) can be eliminated by
making the heating cooker/heating stove work at maximum
conditions for 30-40 minutes (in this case set the thermostat to
80°C) by burning thin dry wood.
Leave the fire to go out and then scrape the inside walls using
a steel spatula.
We recommend you periodically empty the ash drawer to always ensure
an efficient flow of combustion air.
The need to clean the DHW heat exchanger (KP top/TSP top models
only) is indicated by a drop in the quantity or temperature of the water
provided. For cleaning, contact your installation technician who will wash
the heat exchanger using a dedicated pump and special liquid.
To clean the cast iron hob use washing up liquid and a non-abrasive
sponge when the heating cooker/heating stove is cold.
Following a long period of disuse, check for obstructions
in the flue before switching the heating cooker/heating
stove on.
Cleaning the ceramic glass
Only clean the ceramic glass when the heating cooker/heating stove is
off and completely cold. Use a damp cloth or a detergent specifically
formulated for ceramic glass. Do not use abrasive sponges.
Cleaning the flue
The flue must be cleaned at least once a year at the start of the winter
season, and also every time it becomes necessary.
If cleaning is not performed, the operation of the heating cooker/heating
stove and its components may be impaired.
The frequency of cleaning the heating cooker/heating
stove and flue depends on the quality of the wood used.
USE TOP QUALITY WOOD IN ORDER TO OBTAIN THE BEST RESULTS.