klover K top, Руководство пользователя

Страница: 33 / 64

33
FAULT SIGNALLING AND ALARMS
The control unit signals faults associated with the probe via a flashing
message:

Lo :
indicates a value below the set scale (temperature below 0°C)
Probe interrupted

Hi :
indicates a value above the set scale (temperature above 100
℃
)
Probe in short-circuit
PARAMETER SETTINGS
ANTI-FREEZE activation thermostat [°C] 6
SAFETY function activation thermostat [°C] 85
ALARM function activation thermostat [°C] 90
PUMP thermostat hysteresis (A01) [°C] 3
VALVE thermostat hysteresis (A02) [°C] 3
AUX thermostat hysteresis (A03) [°C] 3
SERV thermostat hysteresis (A04) [°C] 3
ANTILOCKING timer [h] 168
ANTILOCKING pump activation time [sec] 30
ANTI-FREEZE Pump OFF time [min] 5
ANTI-FREEZE Pump ON time [sec] 20
Type of Probes (10K blue=’0’ - 100K grey= ‘1’)
no. 0
STANDBY enabling no. 1
ANTI-FREEZE function enabling no. 1
PARAMETERS THAT CANNOT BE MODIFIED
ANTI-FREEZE thermostat hysteresis [°C] 1
SAFETY thermostat hysteresis [°C] 1
ALARM thermostat hysteresis [°C] 1
TECHNICAL SPECIFICATIONS
Power supply:
230 Vac ±10%~50Hz
Protective fuse T3,15A
Mechanical
dimensions:
Built-in temperature controller: 120 x 80 x 50 mm
Temperature
probe:
silicone/pvc cable
Operating temperature: -50
℃
/130
℃
Measurement limits :0
– 99°C Precision: ±1
℃
Outputs:
PUMP output: power supply - 230 Vac max capacity 5 A 250 Vac
VALVE output: power supply - 230 Vac max capacity 5 A 250 Vac
AUX output: free contact max capacity 5 A 250 Vac
SERV output: power supply - 230 Vac max capacity 5 A 250 Vac
Standards applied: EN 60730-1 50081-1 EN 60730-1 A1 50081-2