klover K top, Руководство пользователя

Страница: 32 / 64

32
for a temperature below the ANTI-FREEZE thermostat
temperature
VALVE ON: for a temperature above the VALVE Thermostat
temperature
AUX ON: for a temperature above the AUX Thermostat
temperature
SERV ON: for a temperature above the SERV thermostat
temperature
9- DHW function:
By holding down the P2 (-) and P3 (+) buttons at the same time it is
possible to activate the DHW function. At this point, while the L6 LED
flashes, just set the time (in minutes) for which you want to have all the
heat dedicated to the production of domestic hot water. By activating this
function, the pump turns off and remains off until the minutes set for this
function have elapsed. When this function is active, the pump will turn on
only if the safety temperature of 85 ° C is reached. It is possible to
deactivate this function by holding down the
P2 (-) and P3 (+)
buttons again.
MAIN menu

With a simple click of the P4 (SET) button, it is possible to scroll
though the values of the set Thermostats signalled by the flashing
of the associated
PUMP / VALVE / AUX
LEDs

To change the value:
o
Go to the Thermostat value to be changed.

By using the P2 (-) and P3 (+) buttons, it is possible to
increase/decrease the value.

To save the change, press P4 (SET).

To exit the menu, press P1 (ESC) or wait for 5 seconds
.
Parameters Symbol Min
Factory
setting
Max
Recommended
values
Reference
LED
PUMP
thermostat
A01 50 55 85
Minimum
55
L1
VALVE
thermostat
A02 20 65 85 65 L2
AUX
thermostat
A03 20 85 85 50 L3
SERV
thermostat
A04 20 85 85 55 L7