background image

h.  cosmetic or structural items; or 
i.  any failures due to interference from or with other products and/or sources. 

7.  This Kleenmaid Warranty ceases if: - 

a.  the Product ceases to carry the original manufacturer’s serial number or is sold at an auction; 
b.  the Product is rented; 
c.  damage to the Product has occurred as listed in point 7a; or 
d.  there is failure to pay monies owing on invoices as a result of non-warranty work been carried out at the request 

of the end user as per point 16 below. 

8.  Neither Kleenmaid nor its representatives provide loan equipment under the terms of this Kleenmaid Warranty. 
9.  Any unauthorised access to the internal hardware of the Product will void this Kleenmaid Warranty. 
10.  Repair Notice: Products presented for repair may be replaced by refurbished Products of the same type rather than 

being repaired. Refurbished parts may be used to repair the Products. 

11.  Replacement items are “like for like” and is not “new for old” and does not indicate in any way that a faulty Product 

will be replaced with a new part or unit.  “Like  for like” may either be a quality checked, refurbished or reconditioned 
unit of the same or later batch of model/size/specifications 

12.  The cost of making a claim under this Kleenmaid Warranty is not covered by Kleenmaid, including any costs of 

transportation or travel expenses between your home and your nearest authorised service agent. 

13.  Kleenmaid accepts no liability for items that are lost, damaged, or stolen as a result of freight, transport or storage. If 

you are required to transport the Product to an authorised service centre, you must ensure that it is securely packed 
and insured. 

14.  On Public Holidays or other periods when regular business and wholesale operations are temporarily ceased, 

repairer availability and warranty response times may extend beyond the standard response times due to the 
unavailability of repairers and parts. 

15.  For any repair performed on a Product under this Kleenmaid Warranty where no fault can be found, or the item is 

deemed by Kleenmaid or an authorised agent, to be not faulty under this Kleenmaid Warranty, or the repair or fault 
is not covered under this Kleenmaid Warranty, a ‘No Fault Found’ fee is payable by you. Kleenmaid will advise you 
of this cost and seek your agreement to pay such costs before commencing such repairs. 

16.  Any repairs or services required that are outside the terms and conditions of this Kleenmaid Warranty can be 

carried out at your request at your cost (including where the Product has not been installed or set up correctly). 
Kleenmaid will always advise you of this cost and seek your agreement to pay such costs before commencing such 
repairs. A credit card may be required prior to the commencement of such services. 

17.  Extra charges will be payable by the customer should the Product not be readily accessible without special 

equipment, such as but not limited to cranes and lifts or should the Product be installed in a position that service 
access is blocked and/or repair work is not possible without uninstalling the Product to gain access. 

18.  You, the customer, may be entitled to purchase an extended warranty in respect of the Product. Any extended 

warranty will not be issued by Kleenmaid but by a third party. Any extended warranty services will be provided 
directly by the third party as principal and not as agent for Kleenmaid, under their extended warranty terms and 
conditions and not under this Kleenmaid Warranty.  

19.  To make a claim under this Kleenmaid Warranty, please have your proof of purchase and the serial number of the 

Product ready and call (02) 9310 1207 during business hours. 

20.  This Kleenmaid Warranty is given by: 

Name: Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid 
Business address: Level 2, Suite 3, 204 Botany Rd, Alexandria NSW Australia 2015 
Telephone: (02) 9310 1207

 

21.  Definitions: 

a. 

Australian Consumer Law 

means the 

Competition and Consumer Act 2010

 (Cth). 

b. 

Domestic Use 

means use of the Product for personal, domestic or household purposes. 

c. 

Kleenmaid

 means Compass Capital Services Pty Ltd ABN 96 138 214 525 trading as Kleenmaid. 

d. 

Mainland Australia 

means the following States and Territories of Australia: New South Wales, Victoria, South 

Australia, Western Australia, Queensland, Tasmania, Northern Territory, Australian Capital Territory. 

e. 

Product

 means the appliance sold by Kleenmaid to you as evidenced by the original purchase invoice. 

f. 

Warranty Period

 means the period of 36 months for domestic use, 12 months for non-domestic use or such 

alternative period as may be specified. 

 
 
UPDATE NOTICE: 

This Kleenmaid Warranty is current as at 7 March 2017 but is subject to variation from time to time. 

For the latest version of the Kleenmaid Warranty, please see our website  

http://www.kleenmaid-appliances.com.au/support/your-kleenmaid-warranty

  or phone us on (02) 9310 1207. 

Содержание KCGCT6010





























Отзывы: