Kleenmaid KCGCT6010, Инструкция по использованию и гарантийные обязательства

Страница: 11 / 28

9
GROUNDING
IMPORTANT: Local codes might vary, installation, electrical connections and
grounding must comply with all applicable local codes.
WARNING: This appliance requires ground connection for your protection
against shock hazard and should be connected directly into a properly
grounded receptacle.
WARNING: DISCONNECT ELECTRICAL SUPPLY BEFORE
SERVICING THE APPLIANCE.
When the flexible cord has to be changed it is necessary to follow
the procedure hereafter described:
-Turn off main gas shut-off valve and disconnect electrical supply
-Pull out entire cooktop from the counter by loosing up fixing brackets.
-Disconnect gas supply connector from cooktop manifold
-Open up connecting terminal block cover, see figure 10. For 4 Electric
cooktop, see fig. 10A.
-Open flexible cord lock and loosen up old cord prongs from terminal block.
-Connect new flexible cord prongs to terminal block and fix flexible cord lock,
remember earth wire, yellow and green, must be longer by one inch that the
other ones. For Line and Neutral wire connection, follow signs on terminal
block.
-The flexible cord must be hold tight by the cord lock, in such a way that it
may not be pulled out. The flexible cord path must not be in proximity or in
contact with hot surfaces that may damage the cord itself.
ATTENTION: the flexible cord must be in accordance with National
Electrical Codes and suitable for the cooktop technical characteristics
electrical ratings. Type H05 RR-F 3 x 0.75 for all gas cooktop,
H05 RR-F 3 x 1.5 for all combined gas – electric cooktop and electric
Domino, or H05 RR-F 3 x 2.5 for 4 Electric cooktop.
THE MANUFACTURES DECLINE ANY RESPONSIBILITY FOR IMPROPER
INSTALLATION, ADJUSTMENT, ALTERATION, SERVICE,
MAINTENANCE OR USE OF RANGE WHICH CAN RESULT IN SERIOUS
INJURY OR PROPERTY DAMAGE.