Kipp & Zonen SOLYS Gear Drive, Инструкция по эксплуатации

Страница: 98 / 112

This chapter describes the commands listed in the overview of chapter C.2.
D.1 Instrument operational mode
The instrument should be put in maintenance mode while assembling or servicing the instrument. In maintenance mode the instru-
ment allows assembly and service activities and authenticates against fixed pre-set passwords.
The normal mode should be set when not assembling or servicing the instrument. The normal mode passwords will be kept in
maintenance mode and will be reactivated after switching back to normal mode.
D.1.1 Set instrument operational mode
Description
The command: ‘.set opermode=<mode>;’ will set the instrument operational mode.
Argument (1)
Description The instrument operational mode.
Type Text string
Range ‘normal’, ‘maintenance’
Default ‘normal’
Example
Request:
.set opermode=maintenance;
Response:
.ok;
D.1.2 Show instrument operational mode
Descritpion
The command: ‘.show opermode;’ will show the instrument operational mode.
Argument (none)
Example
Request:
.show opermode;
Response:
.ok;
D.1.3 Clear user account (and operational mode)
Description
The command: ‘.clear account;’ will revert the user account passwords and operational mode to defaults. The command may be
used to go to a known state when logging in on one if the instrument interfaces fails.
D. Description of the commands
98