Kipp & Zonen SOLYS Gear Drive, Инструкция по эксплуатации

Страница: 108 / 112

E.2.2 Extended status message
Description
Message Type 1 Extended status message
Pos Field name Description
0 Message type 1
1 Hostname Instrument hostname
2 Date Current date, YYY/MM/DD
3 Time Current time, HH:MM:SS
4 Solar angle azimuth Calculated solar azimuth/zenith angles in degrees.
North 0 degrees, east 90 degrees.
5 Solar angle zenith Sky 0 degrees, horizon 90 degrees.
6 Axis angle azimuth Actual azimuth/zenith axis angles in degrees.
North 0 degrees, east 90 degrees.
7 Axis angle zenith Sky 0 degrees, horizon 90 degrees.
8 Latitude Latitude in degrees. North positive, south negative.
9 Longitude Longitude in degrees. East positive, west negative.
10 Air pressure Estimated air pressure in millibar.
The estimation is based on the altitude, ground level of 1013 millibar
and atmospheric scale height of 7400 meters.
11 Status code Status code. See paragraph E.2.3
12 Instrument status Instrument status. See paragraph E.2.4
13 Azimuth motor status Motor status. See paragraph E.2.5
14 Zenith motor status
15 Checksum CRC-16 reverse bit order with seed of 0 and XOR polynomial of 0xA001. The checksum is
calculated over all characters till (not including) the first character of the checksum. The
value is in hexadecimal notation (0x<hex>).
Example
Response
.status=1;SolysGD140001;2014/10/28;14:26:24;-134.747698;75.851923;225.252365;75.851952;
51.996899;4.386230;999.36;0x044;0x00018234;0x210B;0x210B;0x6648;<LF>
E.2.3 Status code
The status code reflects the visual indication of the status led on the instrument’s rear plate. The led has 4 states (red, green, orange
and off). The instrument has a circular buffer with 3 elements, each element holds a led state or may be set to unused. Each element
of the circular buffer is displayed by the led for 1 second. In case an element is set to unused, the buffer readout will proceed from
the start without delay. This allows for 1, 2 and 3 second led sequences.
The status code consists of 3 nibbles. The values of the nibbles correspond to the instrument’s circular buffer. The least significant
nibble is displayed first.
Led state Nibble value
UNUSED 0
OFF 1
GREEN 2
RED 3
ORANGE 4
108