Kipp & Zonen SOLYS Gear Drive, Инструкция по эксплуатации

Страница: 110 / 112

E.2.4 Instrument status
The instrument status value is in hexadecimal notation (0x<hex>) and is divided into a state field (bits 7 - 0) and a set of flags (bits
31 - 8).
Instrument status
State Description
bit 7 - 0
2 encoders disabled
3 getting encoder offsets failed
4 failed to find ref sensors
5 ref sensor tests failed
6 slipped
7 not functioning (e.g. FU set illegal)
10 waiting for certain conditions to be met before proceeding (temperature, no motor alarm, LL command)
11 in process of stopping prior to entering next state
15 resetting, requesting encoder offsets
16 resetting, getting encoder offsets
19 resetting, moving to reset position
20 resetting, waiting till reset position reached
21 resetting, testing sensors
22 resetting, moving towards ref sensors
23 resetting, globally finding ref sensors
24 resetting, accurately finding ref sensors
25 resetting, accepting reset
26 resetting, waiting in ref and moving over travel range
27 resetting, preparing for selected function (FU)
28 resetting, preparing for selected function (FU, at home)
29 resetting, preparing for selected function (FU, no default circle)
40 accepting motion commands (not operating autonomously)
50 calculating sun position and pointing at sun, if possible (clear)
51 calculating sun position and pointing at sun, if possible (waiting)
52 calculating sun position and pointing at sun, if possible (tracking)
53 calculating sun position and pointing at sun, if possible (rewinding)
255 undefined
Flags Description
bit 8 searching for ref
bit 9 operating autonomously
bit 10 unused
bit 11 valid GPS position
bit 12 valid GPS altitude
bit 13 system time synchronized
bit 14 using sun sensor
bit 15 fan on
bit 16 adjustment ok
bit 31 - 17 unused
110