Kipp & Zonen SOLYS Gear Drive Скачать руководство пользователя страница 3

Страница: 3 / 112

Dear customer, thank you for purchasing a Kipp & Zonen instrument. It is essential that you read this manual completely for a full

understanding of the proper and safe installation, use, maintenance and operation of your SOLYS 2 or SOLYS Gear Drive sun tracker.

When information refers to both types the sun tracker is addressed as SOLYS, otherwise the specific names SOLYS2 and SOLYS Gear

Drive are used.

We understand that no instruction manual is perfect, so should you have any comments regarding this manual we will be pleased to

receive them at:

Kipp & Zonen B.V.

Delftechpark 36, 2628 XH Delft, - or

P.O. Box 507, 2600 AM Delft,

The Netherlands

+31 15 2755 210

[email protected]

www.kippzonen.com

Warranty and liability

Kipp & Zonen guarantees that the product delivered has been thoroughly tested to ensure that it meets its published speciﬁcations.

The warranty included in the conditions of delivery is valid only if the product has been installed and used according to the

instructions supplied by Kipp & Zonen.

Kipp & Zonen shall in no event be liable for incidental or consequential damages, including without limitation, lost proﬁts, loss of

income, loss of business opportunities, loss of use and other related exposures, however incurred, rising from the faulty and incorrect

use of the product.

Modiﬁcations made by the user may affect the instrument performance, void the warranty, or affect the validity of the CE declaration

or other approvals and compliances to applicable International Standards.

All rights are reserved. No part of this publication may be reproduced, stored in a retrieval system or transmitted, in any form or by

any means, without authorisation by Kipp & Zonen.

Kipp & Zonen reserves the right to make changes to this manual, brochures, speciﬁcations and other product documentation

without prior notice.

Manual document number: V1704

Publication date:

April 2017

Important user information

Содержание SOLYS Gear Drive

















































































































Результаты поиска

Содержание SOLYS Gear Drive

Отзывы:

Бренды по названию

Популярные бренды

Kipp & Zonen SOLYS Gear Drive, Инструкция по эксплуатации

Результаты поиска

Содержание SOLYS Gear Drive

Отзывы:

Бренды по названию

Популярные бренды