KINOVA
®
Communication system
User Guide
24
•
communication
- this lets you:
º
get_info
- view the status of the communication system
º
configure
- set the communication channel to use
•
radio
- radio interface (for communication adapter with radio option)
•
wired
- wired interface (Ethernet)
For each channel option, you have the choice of serial or Ethernet.
Note:
Use the Ethernet option only. The serial option has no effect.
•
features
- this lets you configure different features of the robot:
º
controller
- configure settings for the gamepad
•
get_info
- display current configurations for the gamepad
•
look_inversion
- flip the y-axis for the pitch up / down control on the thumbstick,
for the gripper orientation control response.
•
swap_thumbsticks
- swap the control mappings of the left and right thumbsticks.
º
protection_zones
- a protection zone defines a box-shaped zone surrounding the
robot where the gripper must not enter. This is used for obstacle avoidance. Protection
zones are labeled with a non-negative integer zone ID; they are defined in terms of two
points in the x-y plane representing two opposing corners of a rectangle, and the z values
for the top and bottom of the protection zone. Protection zones are defined in terms of
the reference frame of the robot base, as shown below.
Содержание Communication system
Страница 1: ...User Guide KINOVA Communication system ...
