KINOVA
®
Communication system
User Guide
44
13.
Change the radio IP address to
192.168.111.101
.
CLI->advanced radio z9-pc
ip
_
address 192.168.111.101
14.
Get the adapter serial number. You will need the serial number in the next step to create a
NETWORK_ID to use for the radio configuration of both communication adapters.
a)
CLI-> quickstart get_system_info
b)
Copy the serial number shown by the field :
Serial Number (S/N)
c)
Remove any letters and special characters to keep only the digits, e.g. WO123456-1 will
give the number 1234561
15.
Compute a NETWORK_ID for the pair of radios
a)
On a calculator, in scientific mode (or any mode that has the modulo function)
b)
Enter the serial number obtained from previous step, press
Mod
key and enter the
modulo value: 65533
c)
Copy this result value and save it in a file for later.
This will be the NETWORK_ID in this procedure.
16.
Generate a SHA-2 key (256-bit in hex format)
a)
Go to this web site:
http://www.allkeysgenerator.com/Random/Security-Encryption-Key-Generator.aspx
b)
Click
Generate a 256-bit key
c)
Select:
Hex
check box
Note: This will be the ENCRYPTION_KEY in this procedure. Configuring both adapters
with the same NETWORK_ID and ENCRYPTION_KEY will allow for secure
communications between the two radios.
17.
Copy obtained key and save it for later.
Open a shell on the radio:
CLI-> advanced radio z9-pc configure
18.
Set radio data rate to 1M:
RADIO-CLI-> radioSettings.rfDataRate=RATE_1M
19.
Set radio in gateway mode:
RADIO-CLI-> radioSettings.radioMode=Gateway
20.
Enable hopping mode:
RADIO-CLI-> radioHoppingMode=Hopping_On
21.
Set a unique network ID for the pair of radios:
RADIO-CLI->
radioSettings.networkId=<PASTE_NETWORK_ID>
22.
Activate Encryption:
RADIO-CLI-> encryption.activeKey 1
23.
Set the encryption key to the ENCRYPTION_KEY obtained previously:
RADIO-CLI->
encryption.setKey=key1 <PASTE_ENCRYPTION_KEY>
24.
Save the configuration:
RADIO-CLI-> save
25.
Exit the radio shell (will exit the radio shell and go back to the adapter CLI):
RADIO-CLI->
exit
26.
Set the adapter communication type to radio ethernet:
CLI-> configuration
communication configure radio ethernet
27.
Reboot the adapter to apply all configurations:
CLI-> reboot
What to do next
Configure the operator adapter for paired Z9-PC radio communication
.
Содержание Communication system
Страница 1: ...User Guide KINOVA Communication system ...
