Standard Roof Fixings
The Varisol product range is available with a choice of roof fixing options to suit many roof
types, see diagram below for the most common fixings. Roof fixings are available for slate,
tiled, double lap plain clay, metal seam and concrete. For others please contact Kingspan.
The most common fixings are illustrated and explained in the following section and may be
easily secured to slate, tile or masonry finishes.
Roof kits and their relevant manufacturer codes:
Horizontal Installations
With any installation where the collector is installed horizontally on a wall façade or roof
surface; the airvent on the collector manifold must be the highest point of the collector,
otherwise air in the system will remain in the pipes within the collector tubes and be difficult
to flush out. Airlocks in the pipes will stop circulation through the system.
When the collector is orientated correctly, i.e. with the manifold slightly higher than the base
of the collector, (see below) air will be forced back into the system. In this instance the air
separator will prevent air from circulating.
Roof Kits
3
1
2
5
4
Varisol Installation Manual
05
04
Flat horizontal orientation
(option 4 above)
Wall horizontal installation
(option 5 above)
Minimum 2˚ angle
Minimum 2˚ angle
Option
Code
Description
1
KSK0039
Varisol 10 Sloping Roof Kit
KSK0040
Varisol 20 Sloping Roof Kit
KSK0041
Varisol 30 Sloping Roof Kit
KSK0062
Varisol 10 Bolt Down Roof Kit
KSK0063
Varisol 20 Bolt Down Roof Kit
KSK0064
Varisol 30 Bolt Down Roof Kit
2
KSK0042
Varisol 10 A Frame Kit
KSK0043
Varisol 20 A Frame Kit
KSK0044
Varisol 30 A Frame Kit
3, 4 and 5
KSK0065
Varisol 10 Façade Kit
KSK0066
Varisol 20 Façade Kit
KSK0067
Varisol 30 Façade Kit
2°
Min
2°
Min
Содержание Varisol
Страница 1: ...Renewables Installation Manual...
Страница 23: ...21...