Kingsman Fireplaces Marquis MQZDV3318, Руководство по установке

Страница: 60 / 64

PVH58 Power Vent Parts List for 4/7 Venting
POWER VENT PARTS LIST
– 4/7 VENTING
NUMBER DESCRIPTION
PVH58 Horizontal Power Vent Starter Kit
‐
Exterior Mount
PVH58FM Horizontal Power Vent Kit
‐
Flush Mount
Note: Must use a one-foot section of 5/8 DV hard pipe
to connect to the Power Vent Termination (not
supplied)
CHOOSE CONTROL MODULE OR HARNESS
DEPENDENT ON VALVE SYSTEM
PVC58MV Power Vent Control Module
‐
for Millivolt
Models
PVC58IPI Power Vent Control Module
‐
for
Proflame 1
‐
IPI Models
584
‐
X12 Harness for Proflame 2 IPI
‐
Deluxe
Models
PVH20H Main Wiring Harness Assembly
–
Extension Harness (20ft)
CHOOSE VENTING TO BE USED: SECTION 1 ‐
HARD PIPE, SECTION 2 FLEX VENT
SECTION 1 DIRECT VENT HARD PIPE 4x6-5/8"
– for entire installation
(Two Adapters needed: one at Flue and one at
Termination)
Flue of Fireplace
ZDVDKA Duravent Adapter
– for Flat Flue
ZDVDFA Duravent Adapter
– for Sloped Flue
Termination End
ZDVDIA Duravent Hard Pipe Adapter- (used to
connect 4x6-/8" to 5/8 Hard Pipe)
Note: Must use a one-foot section of 5/8 DV hard pipe
(not supplied) to connect to the Power Vent
Termination.
SECTION 2 FLEX VENT - Used for entire
installation
– order Z47PVA
Note: Must use a one-foot section of 5/8 DV hard
pipe connected to the power vent on all
installations.
Termination End
Z47PVA Flex Pipe Adapter Kit - (to adapt flex
pipe to power vent to hard pipe)
Note: Must use a one-foot section of 5/8 DV hard pipe
(not supplied) to connect to the Power Vent
Termination.
SECTION 3 DIRECT VENT HARD PIPE 3/5"
‐
for
entire installation
(Three Adapters needed two at Flue and one at
Termination)
Flue of Fireplace
‐
Choose appropriate adapter for
4x6
‐
5/8"
ZDVDFA Duravent Fireplace Adapter
4x6
‐
5/8
‐
Sloped Flue
ZDVDKA Duravent Stove Adapter 4x6
‐
5/8"
‐
Flat (Serene 47)
Convert from 4x6
‐
5/8" to 3/5" MG HP
PVA4635 Duravent Adapter
‐
4x6
‐
5/8 TO 3/5
‐
FLUE
Convert to Termination
‐
3/5" to 5/8"
PVA3558 Duravent Adapter for Power Vent
Termination
‐
3/5" to 5/8"
Note: Must use a one-foot section of 5/8 DV hard
pipe to connect to the Power Vent Termination
(not supplied)
FLEX VENTING KITS
ZDVFK5
Flex Kit (4” & 7” Dia.) x 2.5’
(Unexpanded) 5’ Expanded
ZDVFK8 Flex Kit (4" & 7" Dia.) x 8' (c/w Springs,
Screws, Mill Pac)
ZDVFK20 Flex Kit (4" & 7" Dia.) x 20' (c/w Springs,
Screws, Mill Pac)
POWER VENT ACCESSORIES
ZDV4FC
Flex Connector 4” Diameter
ZDV7FC
Flex Connector 7” Diameter
ZDV4FCL Flex Clamp 4"
ZDV7FCL Flex Clamp 7"
ZDV4SS Spring 4" Standoff Spacer
PVH58WT Wall Thimble for Power Vent
60