Kia 1U056 ADU00, Руководство по установке

Страница: 19 / 25

Revision Date
4/22/2013
Page 19 of 25
1. Reinstall any connectors, including the OBDII connector that may have been removed from the lower dash fi nish
panel.
2. Reinstall the lower dash fi nish panel by engaging the fi ve (5) pressure clips, two (2) retaining tabs, four (4)
#2 phillips screws and the driver’s side kick panel retaining clip.
#2 Phillips Screwdriver
27
N
O
T
E
WARNING! Engine Stall Hazard. To prevent stress on the remote start wire harness, ensure the tilt/
telescopic steering column is fully extended, if equipped. Ensure all connectors are fully engaged and
locked in place. An engine stall could cause serious physical injury or vehicle damage.
!
28
N
O
T
E
1. Reinstall the driver’s side dash end cap by engaging
the four (4) pressure clips.
2. Reinstall the fuse panel access cover.
KIA Genuine Accessories
Phillips
Screws
Phillips
Screws
Pressure Clips
Pressure
Clips
Fuse Panel
Access Cover
29
1. Place the Owner’s Guide and the Quick Reference
Guide into the vehicle’s glove box.
N
O
T
E
Owner’s Guide
&
Quick Reference Guide
Retaining
Tabs
Retaining Clip