Kia 1U056 ADU00, Руководство по установке

Страница: 10 / 25

Revision Date
4/22/2013
Page 10 of 25
Remote Start Harness 4-Pin Female
Connector
16
Wire Cutter
N
O
T
E
1. Route the remote start harness 4-pin male and female brake switch connectors to the brake switch at the top of
the brake pedal, as shown above.
2. Disconnect the factory female 4-pin E41 connector and plug in the corresponding remote start harness
connectors.
3. Secure the factory female 4-pin E41 connector and the remote start harness male connector to the remote start
harness with one (1) large wire tie, as shown above. Trim off excess wire tie.
Factory Female E41 Brake Switch
Connector
Large Wire Tie
KIA Genuine Accessories
MDPS Module
Remote Start Harness 4-Pin Male
Connector