Kia 1U056 ADU00, Руководство по установке

Страница: 17 / 25

Revision Date
4/22/2013
Page 17 of 25
KIA Genuine Accessories
Function Check
Items To Be Checked Results Of The Check
Ensure the transportation fuse is properly installed before performing the Function Check.
If the transmitters fail to operate, refer to Page 23 (Transmitter Programming and Battery Test Procedure).
Remote Engine Start - Make sure the key is
removed from the ignition switch and the doors,
tailgate and engine hood are closed. Activate the
remote start by pressing the start button on the
transmitter two (2) times within three (3) seconds.
The parking lights will fl ash one (1) time, the burglar horn
will beep one (1) time, the doors will lock, then the engine
will crank and start. Once started, the burglar horn will
beep one (1) time and the parking lights will come on and
stay on signifying the engine is running.
Brake Pedal Safety - Enter the vehicle and press
and release the brake pedal.
The engine/remote start will turn off.
Hood Safety Switch - Remove the key from the
ignition and activate the remote engine start. After
the vehicle has started, pull the hood release lever
to release the hood. The engine/remote start will turn off immediately.
The hood should not have to be lifted to activate the hood
safety switch.
Car Find Feature - Close the tailgate and press the
red car fi nd / panic button on the transmitter.
Repeat this process two (2) times.
Driver’s Door Unlock / Interior Lamp - Press the
start button on the transmitter one (1) time to
unlock the driver’s door.
The parking lights will fl ash two (2) times, unlock the
driver’s door only and illuminate the interior light for thirty
(30) seconds.
The parking lights will fl ash two (2) times and unlock all
doors. Door Unlock - Close the engine hood and all doors
and activate the remote engine start.
Press the start button on the transmitter two (2)
times within fi ve (5) seconds.
The engine/remote start will turn off and the head lights will
remain on for approximately fi fteen (15) seconds. Ensure
the head lights turn off after fi fteen (15) seconds.
Quick Stop Feature - Enter the vehicle, and close
all doors. Start the vehicle with the ignition key.
With the vehicle in park and foot off the brake
pedal, press the start button on the transmitter one
(1) time. Remove the key from the ignition and
turn on the head lights using the switch.
Remote Engine Stop - Press and hold the start
button on the transmitter for three (3) seconds.
Tailgate Safety Switch - Open the tailgate using the
release inside the vehicle.
The engine/remote start will turn off immediately.
Panic Feature - Press and hold the red car fi nd /
panic button on the transmitter for three (3) seconds
to activate. Press the red car fi nd / panic button a
second time to deactivate.
The parking lights will fl ash and the burglar horn will
beep for up to thirty (30) seconds.
The parking lights will fl ash and the burglar horn will beep
fi ve (5) times. Subsequent presses within fi ve (5) seconds
of the fi rst press will beep the burglar horn slightly louder.
NOTES: Interior lamp switch must be set to door
position to illuminate.
If no door or tailgate is opened within thirty (30)
seconds, the interior lights will turn off and the
doors will auto lock.
The head lights will remain on for the entire fi fteen (15)
minute run time.
Verify that the parking lights turn on and that the vehicle
remains running. The
driver’s door only
will unlock (if
previously locked).
NOTE:
If no door or tailgate is opened within thirty (30)
seconds, the interior lights will turn off and the
doors will auto lock.
Key-In-Sense - Insert the ignition key into the igni-
tion switch but keep it in the OFF position. Activate
the remote engine start using the transmitter. The parking lights will fl ash one (1) time and the ignition
will turn on as if it is going to start. The burglar horn will
beep two (2) times and the remote engine start will not
attempt to start the vehicle since it detects the key in the
ignition. In addition, the driver’s door will unlock and the
vehicle’s interior light will illuminate.
NOTE: Interior lamp switch must be set to door
position to illuminate.