Kia 1U056 ADU00, Руководство по установке

Страница: 5 / 25

Revision Date
4/22/2013
Page 5 of 25
1. Remove the fi ve (5) 10 mm bolts and the one (1)
10 mm nut securing the steel knee bolster panel.
2. Remove the steel knee bolster panel from the
vehicle.
Ratchet, Extension and 10 mm Socket
5
1. Remove the three (3) #2 phillips screws securing
the steering column shroud (one (1) underneath
and two (2) behind the steering wheel). Turn the
steering wheel for access.
2. Release the tilt steering wheel adjuster lever.
3. Pull down to separate the lower steering column
shroud (use trim tool, if necessary) and remove
from the vehicle.
6
Phillips
Screws
#2 Phillips Screwdriver and Trim Tool
N
O
T
E
N
O
T
E
KIA Genuine Accessories
10 mm
Bolts
10 mm Nut
1. Carefully pull the weatherstrip away from the driver’s
side “A” pillar.
2. Remove the access cover and the one (1) #2 phillips
screw from the “A” pillar.
Trim Tool and #2 Phillips Screwdriver
7
1. Starting at the top, use a trim tool and remove the
driver’s side “A” pillar trim panel by inserting the
tool behind the panel and prying outward to release
the two (2) pressure clips.
Trim Tool
8
CAUTION! Do not lose the two (2) pressure clips.
Access Cover and Phillips Screw
Pressure Clips
N
O
T
E
N
O
T
E
!
WARNING! Do not damage air bag components.