Kia 1U056 ADU00, Руководство по установке

Страница: 12 / 25

Revision Date
4/22/2013
Page 12 of 25
21
22
23
24
25
26
31
32
33
34
35
36
3
4
5
6
7
8
12
13
14
15
16
17
27 37
20 30
9 18
2 11
28 10 38
19 1 29
18
Ratchet, Extension, 10 mm Socket, Torque Wrench and Pliers
N
O
T
E
*
Refer to Page 3 for T-Tap Installation Procedure.
1. Reinstall the fuse panel with the two (2) 10 mm nuts and one (1) 10 mm bolt, as shown above. Torque 10 mm nuts
and 10 mm bolt to 7 Nm (0.7Kgf.m, 5 lb-ft).
2. Locate the Brown wire in
pin #35
of the 38-pin
I/P-C female connector
.
3. Using pliers, crimp one (1) T-Tap on the Brown wire located in
pin #35
of the 38-pin I/P-C female connector.
4. Connect the Brown (Alternator Input) wire from the remote start harness to the Brown wire (Pin #35 of the 38-Pin
I/P-C connector) by engaging the T-Tap. Ensure that the male spade is properly centered in the T-Tap.
CAUTION! Ensure the correct pin location is identi fi ed. There may be several wires of the
same/similar color.
*Unplug connector, if necessary, to identify proper pin location and to make T-Tap connection.
KIA Genuine Accessories
38-Pin
I/P-C Connector
Alternator Wire
Brown Wire
Pin 35
Terminal End View
10 mm Bolt
Torque to 7 Nm
(0.7 Kgf.m, 5 lb-ft)
10 mm Nuts
Torque to 7 Nm
(0.7 Kgf.m, 5 lb-ft)
38-Pin
I/P-C Connector
T-Tap