Revision Date
4/22/2013
Page 6 of 25
10"
9"
9"
9
N
O
T
E
Foam Tape
10” (254 mm)
7” (178 mm)
1. Clean the area of the windshield where the antenna will be mounted with an alcohol cleaner and clean cloth.
Ensure the glass surface is completely dry.
2. Remove protective backing and mount the dipole antenna to the windshield approximately 0.25” (7 mm) below the
mirrors lowest attachment point and/or any windshield electronic gridwork. Press fi rmly to ensure a good glass to
adhesive bond.
Alcohol Cleaner, Clean Cloth and Tape Measure
Goggles
Rubber Gloves
Trim Tool and Tape Measure
10
N
O
T
E
1. Wrap the antenna cable with three (3) pieces of small foam tape, at the distances shown above, to ensure that the
antenna cable will stay in place after routing.
2. Route the antenna cable vertically on the right hand side of the mirror mount up to the headliner. Tuck the cable
behind the headliner and down the “A” pillar, as shown above.
KIA Genuine Accessories
10” (254 mm)
Содержание 1U056 ADU00
Страница 24: ...Revision Date 4 22 2013 Page 24 of 25...
Страница 25: ...Revision Date 4 22 2013 Page 25 of 25...