Unite
®
Panel System - Worksurface with Pedestal Support Installation
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
19
Typical Corner Intersection
with Pedestal Support
Installation
Note:
Cantilever brackets and
edge support brackets are used
in this typical configuration.
Your configuration may vary.
Please see pages 3 & 7 for proper
installation.
Pedestal-to-Panel Installation
Note:
All pedestals mount to
the panel in the same manner,
regardless of bracket style.
1. At the location for pedestal
installation, move the pedestal to
the panel and insert the upward
facing teeth of the panel support
bracket into the notches in the
panel frame.
2. Twist and extend the four glides to
raise the pedestal and allow the
upward facing teeth of pedestal
bracket to engage the panel. This
will firmly lock the teeth of the
bracket to secure the pedestal to
the panel.
edge support
bracket
(72 worksurface only)
”
