Unite
®
Panel System - Worksurface Installation
Assembly Instructions
Assemble units as described herein only. To do otherwise
may result in instability. All screws, nuts and bolts must be
tightened securely and must be checked periodically after
assembly. Failure to assemble properly, or to secure parts
may result in assembly failure and personal injury.
15
Worksurfaces to Panel-
Mounted Support Legs
Three panel-mounted support leg
styles may be used per
space-planning layout:
right-hand, left-hand & center
(Figure 19). Each installs to Unite
panels in the same manner to
provide worksurface support and
can be used in place of panel
returns to support panel runs.
Tiles must be installed to properly
installed panels before installing
support legs.
Important:
Prior to installing
any panel-mounted support legs,
ensure that all Unite panel glides
are set to their final height, that
the run of panels is level, and at
its final floor location.
1. Per space-planning layout,
determine which (right, left &
center) support legs are to install
where along the run of panels and
stage accordingly (Figure 19).
Note:
The bottom of the
panel-mounted support leg was
designed to align with the bottom
of the raceway cover of the Unite
panel for aesthetic reasons.
When choosing slot location to
install support leg, take this into
consideration.
2. Screw the adjustable glide at
the bottom, front end of the
panel-mounted support leg all
of the way in to the bottom of the
frame prior to installation
(Figure 19).
3. Locate the lock bracket at the top
of the support leg and loosen
the two nuts, but do not remove
them. Grip the lock bracket studs
and raise the lock bracket. Install
the support leg by inserting
both the stationary teeth on the
support leg and the lock bracket
teeth into the slots in the vertical
post of the Unite panel
(Figure 19).
panel-mounted
support leg
(right-hand)
panel-mounted
support leg
(left-hand)
center
panel-mounted
support leg
panel-mounted
support leg
(left-hand)
panel-mounted
support leg
(left-hand)
Figure 19 - Panel-Mounted Support Legs
