Khomp ITG 200Indoor, Руководство пользователя

Страница: 11 / 41

4. Web Interface access
The ITG 200 has a Web Interface for configuration, diagnosis and monitoring. To access
the Web Interface while the ITG 200 is in its factory settings, configure your computer with the same
IP address range and subnet mask noted below. Use a web browser of your choice to access.
IP Address 10.10.10.100
Subnet mask 255.0.0.0
User admin
Password khomp
4.1 Introduction to the Web Interface
The ITG 200 Web Interface displays a menu to the left of the interface with configuration
options, a panel for monitoring the sending of data collected by the sensors and diagnostic options
for debugging possible failures in the data transmission media.
At the end of this menu, there is the Reset button, which is used for certain changes in the
gateway settings to be applied.
4.1.1 Dashboard
To view the data read by the sensors, access the "Dashboard" menu.
This is the first interface that the user sees after login. Here, the data read by the sensors
are displayed.
11