Khomp ITG 200Indoor, Руководство пользователя

Страница: 15 / 41

In the wired network settings, the user can choose several network configuration options.
Network configurations require the gateway to be reset to apply them.
There are two modes for configuring the Ethernet network: static IP or DHCP. See the
description of the options available in the table below.
Field Description
Use DHCP
Indicates whether the gateway should use an IP address through a DHCP server available on
the network
IP
If static IP address is used, this is the field used to assign the IP address that the ITG 200
should use
Subnet mask
If static IP address is used, this is the field used to assign the subnet mask that the ITG 200
should use
Default Gateway
If static IP address is used, this is the field used to assign the default gateway of the data
network that the ITG 200 should use
MAC address It is the MAC address of the ITG 200 in case it is necessary to clone this address
Configure static IP address
1. Disable the Use DHCP option.
2. Enter the IP address, subnet mask and default network gateway.
3. Click the Submit Configuration button.
4. The gateway must be restarted for the new settings to be applied. Click the Restart button,
located on the side menu.
Configure dynamic IP address
1. Enable the "Use DHCP" option.
2. Click the "Submit Configuration" button.
3. The gateway must be restarted for the new settings to be applied. Click on the "Restart"
button located on the side menu.
Note The front interface displays the defined IP address.
To configure the Ethernet network, access the menu "Network" → "3G modem".
This menu allows you to configure the properties of the 3G modem. You can select the
default SIM card and configure the APN.
4.1.3.2 3G Modem configuration
4.1.3.1 Ethernet network configuration
To configure the Ethernet network, access the menu "Network" → "Ethernet".
15