Others
In this panel it is possible to enable the sending of the RSSI of the 3g modem of the
gateway by MQTT, as well as, configure the time for sending it.
The synchronization of the ITG clock can be performed through the NTP (Network Time
Protocol) service, which adds more flexibility, keeping the gateway clock always up to date.
To change the date and time settings of the ITG 200, access the Settings menu -> Date and
Time.
4.1.7.1
Date and time
The
“Enable”
field allows the functionality to be enabled or disabled. The fields
“Servers 1,
2 and 3”
, allow up to 3 servers to be configured to keep time synchronization. If these three fields are
left empty, the functionality will be automatically disabled, so it is necessary to configure at least one
server to activate it. The
“Update every”
field when set to 0 (zero), causes the functionality to run as a
service, which keeps NTP running at all times, following the NTP specification. When set to a value
other than 0 (zero), this functionality is performed as a process from time to time, according to the
value in minutes defined by the user. This option is characterized by maintaining a faster
synchronism, whenever necessary. In turn, the Log field allows the user to activate and deactivate the
NTP Log whenever necessary, which can be accessed from the
“Logs”
option in the
“System”
menu.
This menu allows you to modify the general settings of the ITG 200: date, time and Log
settings.
4.1.7
Configurations
28
Содержание ITG 200Indoor
Страница 1: ...User Manual ITG 200 Indoor...
