Khomp ITG 200Indoor, Руководство пользователя

Страница: 24 / 41

When the Internal Network Server is active, it is possible to access the "Command" menu
to send messages (commands or even downlinks) to the registered devices. The "Port" and
"Message" fields allow the definition of the port and the content of the message. In addition, if the
device operates in Class C, it is possible to select this option and perform Class C shipments.
The possible commands are described in the manual for LoRa® devices
4.1.5.4 LoRa® commands
Note
In the Port field, only decimal values must be entered, in the Message field, hexadecimal
values must be entered.
Note
●
The HTTP and MQTT protocols cannot be enabled / used simultaneously.
●
All fields with (*) are necessary to enable the respective protocols.
4.1.6 Cloud integration
This menu allows you to configure the connection to the cloud to send data to the
application. Application means the system that will use the data read by the sensors for the purpose
for which it was developed.
It is possible to send data via the MQTT or HTTP protocols. To integrate the ITG 200 with
the application server, access the menu "Integration to the cloud" → "HTTP" or "MQTT" (according to
the protocol you want to use for the integration) and enter the data as described below.
24