54 Keysight N9927-90001 User’s Guide
CAT (Cable and Antenna Test) Mode
1-Port Cable Loss Measurements
A 2-port Insertion Loss measurement is usually more accurate than a 1-port
Cable Loss measurement. However, to perform a 2-port Insertion Loss
measurement, both ends of the cable must be connected to the FieldFox.
How to make a 1-port Cable Loss Measurement
1.
Press
Preset
then
Preset
.
2.
Then
More
then
Cable Loss (1-Port)
3.
Connect the cable to be tested.
4.
Press
Freq/Dist
and enter
Start
and
Stop
frequency values of the
measurement.
5.
Press
Sweep 3
then
Min Swp Time
. Increase the Sweep Time until a stable
trace is visible on the screen. The amount of time that is required increases
with longer cable lengths. Learn more in the
Supplemental Online Help
:
http://na.support.keysight.com/fieldfox/help/SupHelp/FieldFox.htm
6.
Remove the cable to be tested.
7.
Press
Cal 5
, then
QuickCal
or
Mechanical Cal
. Mechanical Cal.
8.
Follow the prompts to perform calibration at the end of the jumper cable
or adapter. Learn more about Calibration in
9.
Connect the cable to be tested.
10.
Connect a LOAD at the end of the cable to be tested. This limits the
reflections to faults that are located in the cable under test.
11.
Press
Trace 6
then
Math and Memory
then
Data->Mem
to store the trace
into Memory.
12.
Remove the LOAD and leave the end of the cable to be tested open.
In high-loss conditions, a Cable Loss measurement becomes ‘noisy’ as the
test signal becomes indistinguishable in the FieldFox noise floor. This can
occur when measuring a very long cable and using relatively high
measurement frequencies. To help with this condition, use High Power
(
) and Averaging. (
QuickCal is only available on N991xA/2xA/3xA models.
Low-level standing waves (also known as ‘ripple’) which may be visible in
reflection measurements, can hide the actual loss of the cable. Steps 10
through 13 can minimize the ripple. Perform the measurement with and
without steps 10 through 13 and choose the method with the least amount
of ripple.
Содержание N9913A
