Keysight ixia BreakingPoint 20, Руководство по установке

Страница: 56 / 66

A
PPENDIX
B Safety Instructions
This appendix describes the various unit safety instructions in English and French.
SAFETY INSTRUCTIONS (English)
CAUTION: Safety Instructions
Use the following safety guidelines to help ensure your own personal safety and to help protect your
equipment and working environment from potential damage.
SAFETY: General Safety
CAUTION
The power supplies in your system may produce high voltages and energy hazards, which can cause
bodily harm. Only Ixia service technicians are authorized to remove the cover and access any of the
components inside the system.
CAUTION
To reduce the risk of electrical shock, a trained service technician must disconnect all power supply
cables before servicing the system.
Note: The installation of your equipment and rack kit in a rack cabinet has not been approved
by any safety agencies. It is your responsibility to ensure that the final combination of
equipment and rack complies with all applicable safety standards and local electric code
requirements. Ixia disclaims all liability and warranties in connection with such combinations.
Rack kits are intended to be installed in a rack by trained service technicians.
When setting up the equipment for use:
l
Place the equipment on a hard, level surface.
l
Leave 5.1 cm (2 in) minimum clearance on all vented sides of the equipment to permit the airflow
required for proper ventilation. Restricting airflow can damage the equipment.
l
Ensure that nothing rests on your equipment’s cables and that the cables are not located where
they can be stepped on or tripped over.
l
Keep your equipment away from radiators and heat sources.
l
Keep your equipment away from extremely hot or cold temperatures to ensure that it is used
within the specified operating range.
Do not stack equipment or place equipment so close together that it is subject to re-circulated or
preheated air.
Appendix B Safety Instructions
– 51 –