Keysight ixia BreakingPoint 20, Руководство по установке

Страница: 30 / 66

7. Select the test component that you want to add to the test.
8. Do any of the following:
l
Click the
Information
tab.
n
Type a new name for the test component in the Name box (optional).
n
Type a new description for the test component in the Description box (optional).
n
Select or clear the
Active
check box (optional).
n
Select or clear the Include in Report check box (optional).
n
Click
Apply Changes
when done.
l
Click the
Interfaces
tab.
n
Select the interface(s) that will act as the client. The interface(s) that you select must be
mapped to a port.
n
Select the interface(s) that will act as the server. The interface(s) that you select must be
mapped to a port.
n
Click Apply Changes when done.
l
Click the Presets tab.
n
Select a Component Preset.
n
Click Apply Changes when done.
l
Click the
Parameters
tab.
n
Adjust any parameters for the test component.
n
Edit the Evasion Profile settings (optional, for the security component only).
n
Click Apply Changes when done.
9. Repeat the preceding three steps for each test component that you want to add to the test.
10. Click Define Test Criteria
from the Test Quick Steps menu and create the pass and fail criteria
for the test. For more information on pass and fail criteria, see the Test Pass/Fail Criteria section
in the user guide.
11. Click Save As
.
12. Type a name for the test in the Name box.
13. Click Save and Run
from the Test Quick Steps menu to run the test.
Chapter 3 Getting Started
– 25 –