Keysight ixia BreakingPoint 20, Руководство по установке

Страница: 21 / 66

1. Log on with an admin account.
2. Click Administration
>
Users
.
3. Click New User . The Create User Account window appears.
4. Configure the account. (See the following table for fields and parameter descriptions.)
5. Click OK
to create the account.
The following table lists and describes the parameters of the Edit Account window:
Parameter Description
Username Name for the account.
Create
Password/Confirm
Password Password for the user name.
Full Name Name identifying the user.
Email Email for the user account. If this user chooses to receive test results by email,
this is the email address that will be used.
Assigned to
Groups Group that the user account will belong to:
l
Admin: Administrators have authority over all user accounts.
l
Regular Users: Standard users can change some aspects of their accounts
and run the applications that administrators have authorized for them.
Permissions to
Use Applications that this user account will be allowed to run.
Task 6: Setting the Time and Date
To set the computer time and day, go to the
System Settings
tab of the
Ixia Administration
page.
The controls on this window set the time and date on the chassis. The computer time and date appears
in test results and system logs. The time and date are not set by default. You need to set it when you
install a new chassis.
Note:
The time and date do not automatically adjust for Daylight Savings Time. You must
manually change the time to account for Daylight Savings Time.
To set the time and date, do the following:
1. Log on with an admin account.
2. Click Administration > System Settings .
3. Click System time and date
.
4. Configure the time and date. (See the following table for parameters and descriptions.)
5. Click Apply
to set the time and date.
The following table lists and describes the parameters of the System time and date window:
Chapter 3 Getting Started
– 16 –