Keysight ixia BreakingPoint 20, Руководство по установке

Страница: 17 / 66

l
Parity: None
l
Stop Bits: 1
l
Flow Control: None
3. Specify the following information in the Network Information
box:
l
DHCP Enable/Disable
l
DHCP Hostname
l
IP Address
l
Netmask
l
Gateway
4. Click Next
when you are done inputting your network settings.
5. Type the login ID that you want to use for the user account at the prompt.
6. Type the password for the user account at the prompt.
The computer disconnects while the new network settings are applied and your new account is created.
Document the network IP address and user account information. You will need this information to
access and log on to the BreakingPoint Control Center. You may create additional accounts through the
Administration
page in the Ixia web app.
Task 3: Establishing a BreakingPoint Session
The Breaking Point (BPS) application has been integrated into Ixia’s web app. This integration enables
you to access the BreakingPoint Control Center from the Ixia web app user interface. You can also
configure certain BreakingPoint chassis properties through the Ixia web app user interface. You can
now create new user accounts and manage them through the Ixia web app user interface.
To establish a BreakingPoint session and operate in the BreakingPoint Control Center, you must first
log on to the Ixia web app.
Note: A session is an individual instance of a running test. You can run multiple sessions at one
time, and manage all your current sessions from a single window. You manage sessions on the
Sessions
page, which appears after you log on.
To establish a BreakingPoint session, do the following:
1. Open a web browser.
2. In the URL
box, type the IP address or hostname of the Ixia chassis where the Ixia web app
server components are installed, followed by the port number that the Ixia web app server is
listening on (the default is 8080), and then press
Enter .
Example: 192.168.100.56:8080
The
Login
page appears.
3. In the Username box, type your user ID.
4. In the Password box, type your password.
5. If you want the browser to automatically fill in the Username and Password field for future logins,
select the
Remember Me
check box.
Chapter 3 Getting Started
– 12 –