Ketterer Drive System 3062, Руководство по сборке

Страница: 4 / 35

Introduction
3062.72-01 Rev. A
S e i t e | 1
1 Introduction
1.1 Content

This documentation is intended to help you work safely on and
with the "Drive system 3062", hereinafter called "drive system".
It contains safety instructions that must be followed for all work
performed on and with the drive system.

The documentation must be made accessible to all persons who
work on and with the drive system. They must have understood
the documentation and follow the specifications and
instructions relevant to them.

The documentation must be always complete and in a clearly
readable condition.
Please read these instructions carefully and follow the safety
instructions exactly!
Depending on the design or modification status of the product,
there may be differences from these instructions. The user
must check this before use and observe the differences if
necessary.
1.2 Scope
These instructions are valid for the incomplete machine with
article number 3062.00-V01XXX and 3062.00-XXXX only.
1.3 Standards and directives
The conformity assessment procedure was carried out in
accordance with the Machinery Directive (MRL) 2006/42/EC.
This drive system is a "partly completed machine" according to
Article 2, Paragraph g), MRL 2006/42/EC.
A declaration of incorporation according to Annex II, Part 1,
Section B, MRL 2006/42/EC is provided in this document.
The drive system is designed according to compliance with the
directives 2011/65/EU (RoHs), 2014/30/EU (EMC) and
2014/53/EU (radio equipment).
Based on the MRL, the manufacturer of the overall system in
which the drive system is installed has the responsibility to
verify and ensure compliance with the essential requirements
of the MRL. This must be done before the complete machine is
placed on the market.