Ketterer Drive System 3062, Руководство по сборке

Страница: 21 / 35

Assembly
3062.72-01 Rev. A
S e i t e | 18

During assembly / mounting, note that the output shaft to the
spindle and the bearings absorb the entire tensile and
compressive forces.

Do not apply excessive forces to any parts of the drive system
during mechanical assembly. Do not use a hammer to push into
the application. Do not drop the drive system.

The device must be mounted as described. Mounting must not
be done with adhesives as they are not considered to be
reliable.
Figure 5-2: Mounting points 3062.00-0010
Figure 5-3: Mounting points 3062.00-V01XXX / 3062.00-0011