Ketterer Drive System 3062, Руководство по сборке

Страница: 30 / 35

Operation
3062.72-01 Rev. A
S e i t e | 27
WARNING!
Danger of overheating the motor drive!
If the drive system is operated outside the operating parameters,
the motor components may overheat. In this case, a blocking time
of 15min. is triggered. No operation is possible during this time. This
blocking time can lead to dangerous situations.
►
Only operate the drive system within the specified operating
parameters.
►
Protect your application in case of a blocking time in which the
motor cannot be controlled.
The following additional warnings apply to versions 3062.00-V01XXX and 3062.0011 with
emergency hand crank for use in umbrellas:
WARNING!
Danger due to inserted emergency crank handle!
If the motor is activated when the emergency crank handle is
inserted, the rotational movement of the crank handle creates a
danger zone which can lead to serious injuries and / or material
damage. The Ketterer emergency crank handle has an integrated
ejector mechanism to prevent it from getting stuck. This ejector
mechanism must not be modified.
►
Remove the emergency hand crank before activating the drive
system.
►
Only insert the emergency hand crank into the gearbox input
when the drive system is not active.
►
Only use the emergency hand crank with integrated ejector
mechanism provided by Ketterer.
►
Do not make any modifications to the emergency hand crank.
►
Do not use the emergency hand crank in the case of a defect,
immediately take care of replacement from the manufacturer.
ATTENTION!
Danger from turning the emergency hand crank too quickly!
If the gear unit is rotated too quickly using the emergency crank
handle, the motor drive will be damaged. In the event of damage,
the motor drive must be replaced. In this case, no warranty or
guarantee claims can be made against Ketterer.
►
Turn the hand crank at a maximum of 1 revolution per second .
►
Never use a cordless screwdriver or similar electrical tools to
operate the drive system.