Ketterer Drive System 3062, Руководство по сборке

Страница: 5 / 35

Introduction
3062.72-01 Rev. A
S e i t e | 2
1.4 Warnings and symbols used
The safety sign visually represents a source of hazard. The safety
signs in these assembly instructions comply with DIN EN ISO
7010.
The following pictograms and signal words are used in this
documentation to indicate hazards and important information:
Pictogram Description
Warning of a general hazard
This warning sign is placed in front of activities where several
causes can lead to hazards.
Hot surface warning
This warning sign stands in front of activities where there is a
hazard from hot surfaces which can lead to burns.
Warning of electric shock
This warning sign stands in front of activities where there is a
risk of electric shock, possibly with lethal consequences.
Warning against pointed object / sharp edges
This warning sign stands in front of activities where injuries can
occur due to pointed and or sharp edges and corners.
Warning of crushing hazard
This warning sign stands in front of activities where hazards
exist due to crushing and shearing points which can lead to
crushing injuries.
Follow instructions
Information