Ketterer Drive System 3062, Руководство по сборке

Страница: 31 / 35

Operation
3062.72-01 Rev. A
S e i t e | 28
Follow the instructions below for operating the drive system:
Jog mode
Short press of the UP or DOWN key for less than 3 seconds 
the drive system rotates until the key is released.
Automatic mode
Press the UP or DOWN key for at least 3 seconds

the drive
system rotates until the end stop is reached and is switched off
via the integrated torque monitoring.
The motor can be stopped at any time in automatic mode by a
short press on the key for the respective opposite direction.
Use of the emergency hand crank with versions 3062.00-
V01XXX and 3062.00-0011
If the drive system is damaged or during a power failure, the
drive system can only be operated by using the emergency hand
crank.

Make sure that no controlling can happen via the radio remote
control during operation with emergency hand crank.

Store the emergency hand crank in a safe place that is quickly
accessible from your application. The emergency hand crank
should be stored in a dry place.

Only use the emergency hand crank if the drive system is not
functioning in an emergency situation such as a storm or if there
is a risk of injury.

Insert the emergency hand crank into the designated input
(Figure 7-1) in the gear unit and turn the crank until your
application is secured.

Turn the emergency hand crank at a maximum of 1 revolution
per second to avoid damaging the motor.

Only use the emergency crank handle for emergency operation
via the gear unit input and under no circumstances use a
cordless screwdriver or other electrical devices.
Figure 7-1: input for emergency hand crank